• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Friction polish without shellac

MarkNotts

Full Member
Joined
May 21, 2016
Posts
64
Location
nottingham
First Name
Mark
Hi, as most will know... buying shellac in the uk is next to impossible, although we can make it from the flakes it has a shelf life, even the flakes have a shelf life if kept dry and in the fridge, 6 months is too short for me as id probably only use the polish once every few months...

I was wondering if we can use anything else instead of shellac with the Iso-propyl Alcohol ( Uk version of Denatured alcohol ) and boiled linseed oil?

I have a long hour day job and get to the lathe maybe an hour a day if lucky and part of the weekend so I dont turn enough to warrent a wasteful shelf life of the flakes but would like some friction polish to hand when i need it
 

Terry Q

Fellow
Joined
Oct 8, 2014
Posts
3,849
Location
Roanoke, Illinois USA
First Name
Terry
Mark you can mix small lots and to keep flakes usable package them with one of those food vacuum sealing devices. I have flake that is over 10 years old. I just seal up the remainder of the flakes. No air, no problem.
 

Louie_Powell

Apprentice Member
Joined
Aug 16, 2014
Posts
39
Location
Saratoga Springs, NY USA
First Name
Louie
I prefer a friction polish based on lacquer rather than the traditional shellac formula. Equal quantities of lacquer, lacquer thinner, and oil. (I use tung oil, but BLO or walnut oil are also fine).

I also make a friction polish by dissolving ordinary paste wax in turpentine, and then adding an equal quantity of oil. This isn't was tough as the lacquer FP, but it is really good for utility items such as tool handles.
 

MarkNotts

Full Member
Joined
May 21, 2016
Posts
64
Location
nottingham
First Name
Mark
Thanks a lot for the replys, I didnt know you could get shellac lasting that long so its made my mind up to make some the shellac way, I might try the laquer way also to compare, I found the formular on Daniel Vilarino's youtube channel from Capn Eddie Castelin, I've made some of Daniel's abrasive paste before and really like the results and a lot cheaper than popular brands :) only difference in the next cook up is pummice instead of tripoli as tripoli makes the paste like a redish ocre shade, nice but not as clear as Im hoping the pummice to make
 

MarkNotts

Full Member
Joined
May 21, 2016
Posts
64
Location
nottingham
First Name
Mark
I use Liberon spirit sanding sealer before any type of polish

Oh sanding sealer yes... so far as Im newish on wood turning and didnt know the brands ive been using toolstation celulose sanding sealer and halfords celulose thinner ;) both close to me at a 50 50 mix, i need to mix some more up so will be trying 80 20 mix and if too sticky then add more thinner to about 70 30
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,342
Location
Canberra AUSTRALIA
First Name
Peter
Was at the Liberon dealer couple of days ago bought the new quick drying Tung Oil. I am a flat out fan of their Black, and their clear Bison polishes. The agents are also world known restoration experts who swear by the products made by Liberon.

Peter.
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,342
Location
Canberra AUSTRALIA
First Name
Peter
Shellac is an overall description comprising Blonde dewaxed, Super blonde dewaxed, White Bleached,Buttonlac,Garnet Shellac and others. All have their uses and peculiar qualities. In and out of favour by substitution of names and various brews made up by manufacturers.

I have a mate whose bud vases sell for up to a thousand dollars made from many timbers, each receives 27 coats of hand rubbed varnish, his small boxes from 10,000 AU to 20,000 AU so if people master the art it can really enhance fine work. I will go shortly and illustrate some of his work.

Peter
 

Woody

Registered
Joined
Jul 12, 2013
Posts
12,812
Location
at home
First Name
no
Oh sanding sealer yes... so far as Im newish on wood turning and didnt know the brands ive been using toolstation celulose sanding sealer and halfords celulose thinner ;) both close to me at a 50 50 mix, i need to mix some more up so will be trying 80 20 mix and if too sticky then add more thinner to about 70 30

I use mine just as it comes I have never diluted it and never seen the need to
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,342
Location
Canberra AUSTRALIA
First Name
Peter
My mate Eugene emmigrated from Europe as a small boy he became an apprentice Furniture maker and Joiner in his fourth year on he built his own brick home and workshop (extraordinary quality throughout).

Some of his work around 27 coats of French Polishing boxes such as these all hand made sold by him round ten thousand onsold to the USA for 18,000 US. A few Bud Vases twenty odd timbers in them.

Now prior to retirement he works in Parliament House Workshop his work is highly regarded another of my heroes.

Peter.
 

Attachments

  • Box 44 1721x1817.JPG
    Box 44 1721x1817.JPG
    127.6 KB · Views: 23
  • Huon Box 1209x1175.JPG
    Huon Box 1209x1175.JPG
    142.7 KB · Views: 23
  • Test Photos with Digital Camera 050.jpg
    Test Photos with Digital Camera 050.jpg
    87.1 KB · Views: 23
  • BV 843x1645.JPG
    BV 843x1645.JPG
    73.4 KB · Views: 23
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top