No Ed it is the start of the next layer black then white
-
Thanks for visiting The Penturners Forum today.
There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.
To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.
Lucida Pen in a herringbone blank
- Thread starter Woody
- Start date
No Ed it is the start of the next layer black then white
Woody,
Sorry, being thick, can see how you glued the blank together at first & can see how it ended up, herringbone pattern, it's the cutting & re-gluing of the blank after it's 1st glued up I can't work out so that you get the herringbone effect.
Sorry, being thick, can see how you glued the blank together at first & can see how it ended up, herringbone pattern, it's the cutting & re-gluing of the blank after it's 1st glued up I can't work out so that you get the herringbone effect.
All I do Steven is glue it up in the herringbone pattern then I put it on the belt sander to square it up them cut of both ends and stick a bit on each end then drill and sand save the bits from the internal V end to start the next one
Ok, clear as mud that 
- Joined
- Jan 31, 2013
- Posts
- 9,504
- First Name
- Terry
Very impressive workmanshop Rev !!!!