Jim
Grand Master
- Joined
- Oct 19, 2011
- Posts
- 15,617
This is the pen that was turned yesterday when Terry called by ... Today i had to replace it back on the lathe and take off the CA finish as i had left the dust spots on the wood from sanding which was showing through the finish. I also noticed this morning that i had the bottom barrel on the wrong way round, and finally i had put the pen together without removing the CA glue that forms around the blank edges. I hate to see what Terry's pens are going to look like ...
This is Oak Burr on gold plated slimline with a CA finish ..
This is Oak Burr on gold plated slimline with a CA finish ..