I have actually managed to make some shed time and start to clear some of the promises I had made to people.
Watch out for the postman If you are one of those people parcels will be going out on Tuesday after the bank holiday.
Also as promised here are the pictures of my bandsaw jig which is a concoction of other jigs and ideas from the forums here.
It is simply a piece of MDF with a 90 piece on top and a slotted hole making it movable, a runner to fit the guide slot and a spacer to loose the screwhead. squared up by the fence.
Before anyone says anything about cnc or routers, it was all done by hand in a vise with hand tools.
The slot is a series of drill holes elongated with a round file, so nothing hard or technical about it.
It simply works at any angle between 90 degrees to the left and swings through to same at right init?
SIMPLES!!
Watch out for the postman If you are one of those people parcels will be going out on Tuesday after the bank holiday.
Also as promised here are the pictures of my bandsaw jig which is a concoction of other jigs and ideas from the forums here.
It is simply a piece of MDF with a 90 piece on top and a slotted hole making it movable, a runner to fit the guide slot and a spacer to loose the screwhead. squared up by the fence.
Before anyone says anything about cnc or routers, it was all done by hand in a vise with hand tools.
The slot is a series of drill holes elongated with a round file, so nothing hard or technical about it.
It simply works at any angle between 90 degrees to the left and swings through to same at right init?
SIMPLES!!