• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Haven't posted here in a while so here are my latest 2

stiofanpadraigcrafts

Graduate Member
Joined
Sep 13, 2015
Posts
408
Location
donegal
First Name
stephen
2 TM Omegas, Bocote wood and Irish Yew.
 

Attachments

  • IMG_20180827_2026211_rewind.jpg
    IMG_20180827_2026211_rewind.jpg
    23.6 KB · Views: 52
  • IMG_20180827_2026353_rewind.jpg
    IMG_20180827_2026353_rewind.jpg
    30.3 KB · Views: 54
  • IMG_20180827_2027212_rewind.jpg
    IMG_20180827_2027212_rewind.jpg
    30.8 KB · Views: 54
  • IMG_20180827_2021085_rewind.jpg
    IMG_20180827_2021085_rewind.jpg
    22.4 KB · Views: 53
  • IMG_20180827_2021460_rewind.jpg
    IMG_20180827_2021460_rewind.jpg
    25 KB · Views: 53
  • IMG_20180827_2023362_rewind.jpg
    IMG_20180827_2023362_rewind.jpg
    19.4 KB · Views: 53

stiofanpadraigcrafts

Graduate Member
Joined
Sep 13, 2015
Posts
408
Location
donegal
First Name
stephen
Very nice. How do you turn the blank like that with the closed end.

I have a closed end pin chuck that fits the body tube, I think it came from pencrafts. The top end I use a closed end 12.5mm pin mandrel and leave the tube out of the blank. I could do with trying to source a proper sized pin chick for that. It seems to work for me but I have to be careful not to shatter the thin wood on the cap side with no tube in it. I have also done it using a normal mandrel pushed deep into my collet chuck and the tailstock supporting the other end, though this is more awkward.
 

stiofanpadraigcrafts

Graduate Member
Joined
Sep 13, 2015
Posts
408
Location
donegal
First Name
stephen
Can I just ask as I haven't tried this style yet but how do you do the closed end peices?

I have a closed end pin chuck that fits the body tube, I think it came from pencrafts. The top end I use a closed end 12.5mm pin mandrel and leave the tube out of the blank. I could do with trying to source a proper sized pin chick for that. It seems to work for me but I have to be careful not to shatter the thin wood on the cap side with no tube in it. I have also done it using a normal mandrel pushed deep into my collet chuck and the tailstock supporting the other end, though this is more awkward.
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top